Product Description

Place your motorcycle on the Ez-Up center stand while still on your bike - Place bike in gear and drive awayAvailable in standard suspension heightLoad carried entirely on the bottom of frame railsMounts to the frame with 2 bolts in approximately 10 minutes with 3/4in wrench All mounting hardware is supplied with complete illustrated instructionsNo frame or bike modifications requiredMaintenance free with I-Glide self-lubricating bushings at the pivot locations, zinc-plated axle and stainless steel springsOriginal side stand is still fully functional with center stand installedBlack powder-coated with chrome foot leverMade in USAThis item fits the following models: 1994-2008 Harley Davidson FLHR Road King2007-2008 Harley Davidson FLHRC Road King Classic1998-2006 Harley Davidson FLHRCI Road King Classic1996-1997 Harley Davidson FLHRI Road King2000-2006 Harley Davidson FLHRI Road King2004-2007 Harley Davidson FLHRS Road King Custom2004-2006 Harley Davidson FLHRSI Road King C ustom1989-1993 Harley Davidson FLHS Electra Glide Sport1995-2008 Harley Davidson FLHT Electra Glide Standard1989-2005 Harley Davidson FLHTC Electra Glide Classic2007-2008 Harley Davidson FLHTC Electra Glide Classic1996-2006 Harley Davidson FLHTCI Electra Glide Classic1989-1997 Harley Davidson FLHTCU Electra Glide Ultra Classic2007-2008 Harley Davidson FLHTCU Electra Glide Ultra Classic1995-2006 Harley Davidson FLHTCUI Electra Glide Ultra Classic2003-2006 Harley Davidson FLHTI Electra Glide Standard2006-2008 Harley Davidson FLHX Street Glide2006 Harley Davidson FLHXI Street Glide1989-1991 Harley Davidson FLTC Tour Glide Classic1989-1995 Harley Davidson FLTCU Tour Glide Ultra Classic1996 Harley Davidson FLTCUI Tour Glide Ultra Classic1998-2002 Harley Davidson FLTR Road Glide2007-2008 Harley Davidson FLTR Road Glide1998-2006 Harley Davidson FLTRI Road Glide

---

Product Details

• Amazon Sales Rank: #185146 in Automotive
• Brand: Wheeldock
• Number of items: 1
• Dimensions: 13.00" h x 9.00" w x 25.50" l, 12.60 pounds

Features

• The MODEL 1 is for STOCK motorcycles 1989-2008 (CS-1C)
• ONLY fits Harley Touring Bikes with STOCK SUSPENSION
• Available in standard suspension height.
• Load carried entirely on the bottom of frame rails
• Mounts to the frame with 2 bolts in approximately 10 minutes with 3/4in wrench. All mounting hardware is supplied with complete illustrated instructions
• No frame or bike modifications required. Place your motorcycle on the Ez-Up center stand while still on your bike - Place bike in gear and drive away

---

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Works good, hopefully lasts a long time!
By HDRider
Very easy to install, about 5 mins. Very sturdy and stable! The chrome foot lever that you use to kick the stand out is a little long, a bit annoying when it hits you in the leg during normal manuvering but not much you can do with it... It does make the cleaning the bike especially the rear wheel alot easier!...

1 of 1 people found the following review helpful.
Brilliant equipment
By Pierre
This center stand is clever design and should be stock ! Easy to fit and operate it will change a biker's life !

0 of 0 people found the following review helpful.
Be Careful
By Paul D. Mcinerny
The stand was very easy to install on my stock, 2005 HD Road King Classic. I slipped a 1 quart paint can underneath to hold the stand in place while I worked on it. The can held the stand snug against the frame and allowed me to hold the washer while I pushed the bolt through. It really is as easy to install as everyone says. Once installed, I put my foot on the lever and up and back the bike went.

Here is where I offer a word of caution. I have the typical concrete garage floor. No extra coating or anything like that. While the bike was on the center stand, I straightened the front fork and the bike rolled forward and off the stand. At first, I though I must not have put the bike far enough back on the stand, but I repeated the procedure several times and each time the bike rolled forward and off the stand. I even tried putting the bike up on the stand with the forks already facing forward. I could use one finger to push the bike forward and off the stand. I think perhaps they designed the stand too short. As I mentioned, I have a stock HD.

If I placed a board underneath the stand, the bike is much more stabilized. I'm going to have to get a thicker board to get the wheel off the pavement (for cleaning).

When I reviewed the video on EZ web page to see if I had done something wrong, I noticed the demo showed the guy on the HD on a driveway at a slight incline, so of course, the bike didn't roll off. If I had my girlfriend climb on the bike like the woman on the video, we would have had a nasty accident.

Pros: It is very, very easy to install. Two bolts and you're done.
Cons: The bike rolls off the stand if on level ground at the slightest provocation.

CAUTION: I would NOT use this center stand on level ground when you are out and about. You may come back and find your bike on its side. This is probably best used only in your garage or other controlled environment .

Would I recommend it? Hmmm...probably not. Although I researched a lot of stands before this purchase, this really could be a very dangerous or costly (if your bike falls) piece of equipment if you are not careful.